SEAL 098 - Tapered Seal - 900mm
- Length 900mm (90cm)
- Tapered Shower Seal
- The fin is tapered from 5mm at the smallest to 15mm at the biggest
- See the description below for full information on this seal
- FREE Delivery in mainland UK *
Designed to suit an uneven gap under the door.
SEAL098 is a tapered shower seal that is designed for use on the bottom horizontal section of a bath shower screen or shower door. The seal tapers to suit an uneven gap between the bottom of the glass and top of the bath or tray.
This seal can be pushed into place over any glass that measures between 4mm and 6mm and will not need any type of adhesive to hold it in place.
This shower seal has a 15mm tall soft fin on the bottom of the U section which tapers down to a 5mm tall soft fin on the other end. Once pressed against a flat surface (e.g. your shower tray or bath edge) this seal will compress and create a watertight seal.
Our tapered seals come in a number of different sizes to accommodate any size gap. In most cases we recommend using a seal with a fin between 2-5mm bigger than the gap you nned to seal. To see our other sizes of tapered seals, please click here.
This seal as sold is best used for straight glass, however if you need this seal for curved glass then send us an email (firstname.lastname@example.org) and we can make them up to suit.
SEAL098 is available as a 90cm (900mm) length.
This seal can easily be cut down to your required length using a junior hacksaw or a small pair of garden secateurs, if you prefer we can cut the seal down to the length that you require, just make sure to put your length in the cut to length box above.
Need any further help fitting or finding the correct seal?
Visit our help page by clicking here, our help page has plenty of helpful videos to help you find the correct seal and fit it with ease.