As low as £17.99
In Stock

Please check that you have chosen a seal longer than your cut to size measurement

  • Fits 10mm glass
  • Slot to add T seal up to 6mm wide
  • Normally used horizontally
  • Lengths of 800mm, 900mm, 1400mm or 2000mm available
  • Cut to exact length service available.
  • FREE Delivery in mainland UK*


SEAL085-T is a seal that has a slot in the bottom for adding various T seals.

It is commonly found on the bottom horizontal section of a bath shower screen or shower door.

This seal can be pushed into place over any glass that measures 10mm will not need any type of adhesive to hold it in place.

This shower seal on this listing is sold with the Tee seal.

If you require the same seal without a T piece see SEAL085 which is the same seal sold without the Tee piece.

If you require the same seal but for other glass thicknesses  then please see our SEAL083T for (4-6mm) or for (8mm) SEAL084T

SEAL085-T is available in 4 different lengths, choose from either 800mm (80cm), 900mm (90cm), 1400mm (140cm) and 2000mm (200cm). This seal can easily be cut down to your required length using a junior hacksaw, or if you prefer we can cut the seal down to the length that you require.

Need any further help fitting or finding the correct seal? Visit our help page which has plenty of helpful videos to help you find the correct seal and fit it with ease.



Copyright © 2019 Showerseal (UK) Ltd. All rights reserved.