Last updated: Thu 22 October 13:55
Covid-19:- We are currently open and dispatching orders as normal, with around 98% being delivered on time. 
There are still occasional delays to delivery times on some orders though, so please allow extra time for your goods to arrive before contacting us if your order is not delivered on time.

SEAL083T

From £17.99
In Stock
SKU
SEAL083T
  • Fits 4-6mm glass
  • Slot to add T seal up to 6mm wide
  • Normally used horizontally
  • Lengths of 800mm, 900mm, 1400mm or 2000mm available
  • Cut to exact length service available.
  • FREE Delivery in mainland UK*

SEAL083-T

SEAL083-T is a seal that has a slot in the bottom for adding various T seals.

It is commonly found on the bottom horizontal section of a bath shower screen or shower door and is sometimes used on L shaped screens with a corner piece CG002.

This seal can be pushed into place over any glass that measures between 4mm and 6mm and will not need any type of adhesive to hold it in place.

This shower seal on this listing is sold with the Tee seal but not the corner piece. The corner piece can be added at the foot of the page or see CG002

If you require the same seal without a T piece see SEAL083 which is the same seal sold without the Tee piece.

If you require the same seal but for thicker glass (8mm), then please see our SEAL084-T or for (10mm) SEAL085-T

SEAL083-T is available in 4 different lengths, choose from either 800mm (80cm), 900mm (90cm), 1400mm (140cm) and 2000mm (200cm). This seal can easily be cut down to your required length using a junior hacksaw, or if you prefer we can cut the seal down to the length that you require.

Need any further help fitting or finding the correct seal? Visit our help page which has plenty of helpful videos to help you find the correct seal and fit it with ease.

 

Copyright © 2020 Showerseal (UK) Ltd. All rights reserved.