- Fits 4-6mm glass
- Ideal for doors opening or closing over thresholds or frames
- Normally used horizontally
- Lengths of 800mm, 900mm, 1400mm or 2000mm available
- Cut to exact length service available.
- FREE Delivery in mainland UK*
SEAL110 is a top edge fin seal that is commonly found either on the bottom horizontal section of a bath or shower screen. It is ideal where you have a threshold or frame for the seal to pass over when opening or closing the door.
This seal can be pushed into place over any glass that measures between 4mm and 6mm and will not need any type of adhesive to hold it in place.
This shower seal has a long fin coming off the top of the seal that hangs roughly 15mm below the bottom of the U section.
If you require the same seal but for thicker glass (8-10mm), then please see our SEAL111.
This seal is best used for straight glass but we can make them curved if required. If you need this seal curved please contact us for details.
SEAL110 is available in 4 different lengths, choose from either 800mm (80cm), 900mm (90cm), 1400mm (140cm) and 2000mm (200cm). This seal can easily be cut down to your required length using a junior hacksaw, or if you prefer we can cut the seal down to the length that you require.
Need any further help fitting or finding the correct seal? Visit our help page which has plenty of helpful videos to help you find the correct seal and fit it with ease.