SEAL 109 - 10-12mm Glass - 20mm Fin
- Fits 10-12mm glass
- 20mm Wide soft fin
- Can be used vertically or horizontally
- Lengths of 800mm, 900mm, 1400mm or 2000mm available
- Cut to exact length service available.
- FREE Delivery in mainland UK*
SEAL109 is a seal with a 20mm fin that is commonly found on shower doors and bath shower screens, this seal isnormally used vertically either in pairs or singularly on the bottom horizontal section of the glass.
This seal can be pushed into place over any glass that measures between 10mm and 12mm and will not need any type of adhesive to hold it in place.
This shower seal has a 20mm soft fin protruding at 90 degrees from the top of the U section, which when used vertically will normally either contact the glass, wall or a matching seal. If used on the bottom of a bath screen the fin will deflect water away from the seal and back into the bath.
If you require the same seal with a shorter fin then we also sell SEAL032 which is the same shape and glass thickness but with a 10mm fin.
SEAL109 is available in 4 different lengths, choose from either 800mm (80cm), 900mm (90cm), 1400mm (140cm) and 2000mm (200cm). This seal can easily be cut down to your required length using a junior hacksaw, or if you prefer we can cut the seal down to the length that you require.
Need any further help fitting or finding the correct seal? Visit our help page which has plenty of helpful videos to help you find the correct seal and fit it with ease.