SEAL 009 - 8-10mm Glass - Gaps up to 7mm

As low as £11.99
In Stock
SKU
SEAL009

Please check that you have chosen a seal longer than your cut to size measurement

  • Fits 8-10mm glass
  • Seals gaps of up to 7mm
  • Can be used vertically or horizontally
  • Lengths of 800mm, 900mm, 1400mm or 2000mm available
  • Cut to exact length service available.
  • FREE Delivery in mainland UK*

SEAL009

SEAL009 is a bubble shaped seal that is commonly found either on the bottom horizontal section of a bath shower screen or shower door or used vertically on the upright of the glass.

This seal can be pushed into place over any glass that measures between 8mm and 10mm and will not need any type of adhesive to hold it in place.

This shower seal has a 7mm tall soft bubble on the bottom of the U section which once pressed against a flat surface (e.g. your shower tray or bath edge) will compress and create a watertight seal.

If you require the same seal with a taller bubble then we also sell SEAL023 which is the same shape and glass thickness but with a 16mm tall bubble.

If you require the same seal but for thinner glass (4-6mm), then please see our SEAL001.

SEAL009 is available in 4 different lengths, choose from either 800mm (80cm), 900mm (90cm), 1400mm (140cm) and 2000mm (200cm). This seal can easily be cut down to your required length using a junior hacksaw, or if you prefer we can cut the seal down to the length that you require.

Need any further help fitting or finding the correct seal? Visit our help page which has plenty of helpful videos to help you find the correct seal and fit it with ease.

Copyright © 2019 Showerseal (UK) Ltd. All rights reserved.