SEAL 003 - 4-6mm Glass - Gaps up to 12mm

As low as £11.99
In Stock
SKU
SEAL003

Please check that you have chosen a seal longer than your cut to size measurement

  • Fits 4-6mm glass
  • Seals gaps of up to 12mm
  • Can be used vertically or horizontally
  • Lengths of 800mm, 900mm, 1400mm or 2000mm available
  • Cut to exact length service available.
  • FREE Delivery in mainland UK*

SEAL003

SEAL003 is a bubble shaped seal that is commonly found either on the bottom horizontal section of a bath shower screen or shower door or used vertically on the upright of the glass.

This seal can be pushed into place over any glass that measures between 4mm and 6mm and will not need any type of adhesive to hold it in place.

This shower seal has a 12mm tall soft bubble on the bottom of the U section which once pressed against a flat surface (e.g. your shower tray or bath edge) will compress and create a watertight seal.

If you require the same seal with a different size bubble then we also sell SEAL001 which is the same shape and glass thickness but with a 7mm tall bubble or we have SEAL079 which is the same but with a 16mm tall bubble.

If you require the same seal but for thicker glass (8-10mm), then the next closest seal would be SEAL023.

This seal is best used for straight glass and for the curved equivalent you will need SEAL028.

SEAL003 is available in 4 different lengths, choose from either 800mm (80cm), 900mm (90cm), 1400mm (140cm) and 2000mm (200cm). This seal can easily be cut down to your required length using a junior hacksaw, or if you prefer we can cut the seal down to the length that you require.

Need any further help fitting or finding the correct seal? Visit our help page which has plenty of helpful videos to help you find the correct seal and fit it with ease.

 

Copyright © 2019 Showerseal (UK) Ltd. All rights reserved.