SEAL 002 - 4-6mm Glass - Gaps up to 12mm

As low as £11.99
In Stock
SKU
SEAL002

Please check that you have chosen a seal longer than your cut to size measurement

  • Fits 4-6mm glass
  • Seals gaps of up to 12mm
  • Can be used vertically or horizontally
  • Lengths of 800mm, 900mm, 1400mm or 2000mm available
  • Cut to exact length service available.
  • FREE Delivery in mainland UK*

SEAL002

SEAL002 is a straight fin shaped seal with an additional bubble on the bottom, this is commonly found on the bottom horizontal section of a bath shower screen or shower door but can also be used vertically on the upright of the glass.

This seal can be pushed into place over any glass that measures between 4mm and 6mm and will not need any type of adhesive to hold it in place.

This shower seal has a 12mm tall soft fin and bubble on the bottom of the U section which once pressed against a flat surface (e.g. your shower tray or bath edge) will compress and create a watertight seal.

If you require the same seal with a taller bubble then we also sell SEAL060 which is the same shape and glass thickness but with a 9mm tall bubble.

If you require the same seal but for thicker glass (8-10mm), then please see our SEAL059.

This seal is best used for straight glass, if you require this seal for curved glass then please contact us via email info@showersealuk.com

SEAL002 is available in 4 different lengths, choose from either 800mm (80cm), 900mm (90cm), 1400mm (140cm) and 2000mm (200cm). This seal can easily be cut down to your required length using a junior hacksaw, or if you prefer we can cut the seal down to the length that you require.

Need any further help fitting or finding the correct seal? Visit our help page which has plenty of helpful videos to help you find the correct seal and fit it with ease.

 

Copyright © 2019 Showerseal (UK) Ltd. All rights reserved.