MAG 015 - Fits 10-12mm Glass - 1 Pair

In Stock

Please check that you have chosen a seal longer than your cut to size measurement

  • Pair of Magnetic Door Seals for 10-12mm glass doors
  • Can be used on straight or quadrant sliding doors
  • Will close a gap between two doors of up to 20mm
  • Available in pairs only 2000mm (2M Long)
  • Simply turn one seal up the other way to alter if the seals come together straight or at a slight angle as shown in pictures below
  • This listing is for a pair of magnetic door seals that fit over the glass on shower doors with 10-12mm glass. The magnets are made at a slight angle meaning that they can be used on either sliding doors that come together straight, or if you turn one seal up the other way they come together at a slight angle which then makes them suitable for sliding doors on quadrant shower enclosures.
  • The maximum gap they can span between to glass doors is 20mm. To check if you remove the old magnetic seals from your shower door, close the doors and measure the gap between the two doors when in the closed position, as long as the gap between the two glass doors is 20mm or less then they should fit fine.
  • If you are unsure please send us a small piece of your old seal first and we will try to match it up for you.
  • These seals fit all types of straight or quadrant sliding doors with the above measurements. Please note they are not suitable for pivot doors that close at an angle of 90 degrees
  • Simply remove your old magnetic seals from the glass, cut the new magnetic seal to length, turn the seals over to make them suitable for either a straight or quadrant door and push the new magnetic seal on to the glass doors

  • 2 Year guarantee
  • Modern easy fit design
  • 200cm (2M) Long. Sold in Pairs Only
  • Strong, durable and easy to install
  • No DIY knowledge necessary
  • Easily cut to size
  • Available in any quantity for bulk orders


Copyright © 2019 Showerseal (UK) Ltd. All rights reserved.