Update: 23rd July 2021: Royal Mail deliveries in some areas of the UK are subject to delays due to staff self-isolation.

We therefore cannot currently guarantee the normal delivery times and request that you allow some extra time for your order to be delivered before notifying us that it has not yet arrived.

FIN 016 - 10-12mm Glass - 10mm or 20mm fin

From £11.99
In Stock
  • Fits 8-12mm glass
  • 10mm or 20mm Wide soft fin
  • Can be used vertically or horizontally
  • Lengths of 800mm, 900mm, 1400mm or 2000mm available
  • 2600mm length available for 10mm version
  • Cut to exact length service available.
  • FREE Delivery in mainland UK*


FIN016 is a seal with a 10mm or 20mm fin that is commonly found on shower doors and bath shower screens, this seal isnormally used vertically either in pairs or singularly on the bottom horizontal section of the glass.

This seal can be pushed into place over any glass that measures between 10mm and 12mm and will not need any type of adhesive to hold it in place.

This shower seal has a 10mm or 20mm soft fin protruding at 90 degrees from the top of the U section, which when used vertically will normally either contact the glass, wall or a matching seal. If used on the bottom of a bath screen the fin will deflect water away from the seal and back into the bath. 

FIN016 is available in 4 different lengths, choose from either 800mm (80cm), 900mm (90cm), 1400mm (140cm) and 2000mm (200cm) (plus 2600mm (260cm) for the 10mm fin version). This seal can easily be cut down to your required length using a junior hacksaw, or if you prefer we can cut the seal down to the length that you require.

Need any further help fitting or finding the correct seal? Visit our help page which has plenty of helpful videos to help you find the correct seal and fit it with ease.


Copyright © 2021 Shower Seal (UK) Ltd. All rights reserved.