BAR002 - Support Bar
- Wall to glass telescopic wetroom support bar
- Telescopic length, fits any distance between 700 and 1200mm
- Suitable for 8mm glass
- Made from stainless steel, luxurious polished chrome finish
BAR002 - Adjustable Telescopic Wetroom Glass Support Bar
This round shaped telescopic shower bar is designed to hold and stabilise a shower screen/door or wet room screen/enclosure. The arm will create additional support for the glass without any need to drill any holes in the glass as it simply clamps over the glass with the provided spacers.
Simply measure between the wall and glass, adjust the telescopic bar to the correct size, attach the flat end to the wall, insert the panel into the clip using the provided spacers to protect the glass and tighten screws to secure.
This bar is a telescopic support bar so there is no need for any tricky cutting and you're always guaranteed to have a nice smooth finish, simply adjust the bar to the correct size and lock it in place using the grub screws.
This will span a gap from 700mm at the minimum to 1200mm at the maximum.
This support bar features swiveling ends which lock in place so you can either use this bar as it comes, straight off of the wall (when the glass is at a 90 degree angle to the wall, see image 4), it can also be used at a 45 degree angle to span the corner (see image 5) or at 180 degrees (see image 6).
This bar is made from stainless steel and finished in a luxurious polished chrome to match the rest of your bathroom.
Includes all fixings required for fitting (see image 3).